honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Trim Removal/Installation - Pillar Areas|Page 7987 > < Trim Removal/Installation - Pillar Areas|Page 7985
Page 4
background image

6. If the side curtain airbag has not deployed, remove the upper clip (A) from the removed A-pillar trim (B) and discard it. Then check the trim:

-

To prevent the side curtain airbags from deploying improperly and possibly causing injury, inspect the A-pillar trim and replace it if it has any
of these types of damage:
-

Any cracks, deformations, or stress-whitened in the A-pillar trim

-

Any cracks or stress-whitened in the clip seating surfaces (C, D)

-

Replace the lower clips (E) if it is damaged.

-

Replace the upper clip with a new one.

-

4-door A-pillar trim is shown; 2-door A-pillar trim is similar.

7. Before installing the A-pillar trim (A), whether replaced or reinstalled, temporarily remove new upper clip (B).
8. Check the overlap between the headliner and A-pillar trim, and if necessary, adjust it.

Trim Removal/Installation - Pillar Areas|Page 7987 > < Trim Removal/Installation - Pillar Areas|Page 7985