honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Trim Removal/Installation - Pillar Areas|Page 7998 > < Trim Removal/Installation - Pillar Areas|Page 7996
Page 15
background image

NOTE:
-

Make sure the side Curtain airbag isn't tucked down under the clips and ribs.

-

Apply pressure to the areas of the trim just upon the quarter/C-pillar upper clips until these clip fittings are felt. If you push too hard, the
clip will be damaged, and it will not hold the trim properly.

-

Make sure the upper clip portions of the trim don't come off the body by tugging on the trim back.

16. Reinstall the rear window harness cap (A) to the quarter pillar trim (B) until its hooks (C) snap into place securely.

Trim Removal/Installation - Pillar Areas|Page 7998 > < Trim Removal/Installation - Pillar Areas|Page 7996