Civic L4-1.8L (2006)
12. Insert the new actuator terminals into the connector in the original arrangement.
13. Apply tape to seal the intersection of the wire harness and the gasket.
14. Reassemble in the reverse order of disassembly. Be careful not to break the mirror when reinstalling it to the actuator.
15. Reinstall the mirror assembly on the door.
16. Operate the power mirror to ensure smooth operation.
2-door
1. Remove the mirror holder.
2. Remove the power mirror.
3. Disconnect the 8P connector from the power mirror.
4. Remove the gasket (A).
5. Remove the T-10 Torx screws (B).