Civic L4-1.8L (2006)
13. Release the clips (A) from under the seat cushion (B).
14. Pull back the edge of the seat cushion cover all the way around, and release the clips (A), then remove the seat cushion cover.
15. Install the cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips and
hook strips.
-
Replace any clips you removed with new ones (A). Install them with commercially available upholstery ring pliers (B).
Special Tools Required
KTC trim tool set SOJATP2014 *
*
Available through the American Honda Tool and Equipment Program; call 888-424-6857
4-door
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
-
Check the operation of the driver's seat position sensor after any of these actions:
-
Driver's seat position sensor replacement
