Civic L4-1.8L (2006)
8. Pull back the edge of the seat-back cover (A) all the way around, and release the clips (B), then remove the seat-back cover.
9. Install the cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the clips and
hook strips.
-
Replace any clips (A) you removed with new ones. Install them with commercially available upholstery ring pliers (B).
Seat-back - Split Fold Down - 2-door
NOTE:
-
Take care not to tear the seams or damage the seat covers.
-
Put on gloves to protect your hands.
1. Remove the seat-back.
2. Remove these headrest.
3. Left seat-back: Remove the screw, then remove the center belt guide (A).
