Civic L4-1.8L (2006)
8. Pull back the edge of the seat-back cover (A) all the way around, and release the hooks (B) of the horizontal wires (C) from the vertical wires (D)
on the pad, and remove the clips (E), then remove the seat-back cover.
9. Install the cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the clips and
hook strips.
-
Replace any clips (A) you removed with new ones. Install them with commercially available upholstery ring pliers (B).
Seat-back - Split Fold Down - 4-door
NOTE:
-
Take care not to tear the seams or damage the seat covers.
-
Put on gloves to protect your hands.
1. Remove the seat-back.
2. Remove these items:
-
Armrest
-
Headrest
