Civic L4-1.8L (2006)
^
If the outboard (next to the door) rail is locked up, remove the recline cover.
^
On the driver's seat, adjust the seat height to its highest position.
^
Release the locking mechanism:
-
Locate the hole on top of the jammed rail above the locking mechanism.
-
Release the spring-activated lock by inserting the short end of a 6-mm Allen wrench in the hole.
-
While pressing down on the locking mechanism, use your other hand to pull back on the slide bar, and slide the seat fully forward.
6.
Lay the seat down on its back cover. Remove the slide bar by gently tapping up on each side of it with a dead blow hammer or rubber mallet.
NOTE:
