Civic L4-1.8L (2006)
Braking Sensor/Switch: Adjustments
Brake Pedal and Brake Pedal Position Switch Adjustment
Pedal Height
1. Turn the brake pedal position switch (A) counterclockwise, and pull it back until it is no longer touching the brake pedal.
2. Pull back the carpet and find the cutout in the insulator. Lift up the insulator cutout and measure the pedal height (B) at the middle of the left side
center of the pedal pad (C) to the floor.
Standard pedal height (with carpet removed):
M/T model: 153 mm (6.0 inch)
A/T model: 158 mm (6 1/4 inch)
3. Loosen the pushrod locknut (A), and screw the pushrod (B) in or out with pliers until the standard pedal height from the floor is reached. After
adjustment, tighten the locknut firmly. Do not adjust the pedal height with the pushrod pressed.
Brake Pedal position Switch Clearance