Civic L4-1.8L (2006)
DAMAGED O-RINGS:
If a sensor 0-ring is pinched or damaged, do this:
^
Replace the corresponding rear hub bearing unit(s):
-
Refer to page 18-34 (with disc brakes) or 18-35 (with drum brakes) of the 2006-2008 Civic Service Manual, or
-
Online, enter keyword HUB, then select Rear Knuckle/Hub Bearing Unit Replacement from the list.
^
Replace the damaged 0-ring on the original sensor.
^
Go to step 6 to reinstall the original ABS wheel speed sensor.
If the 0-rings are OK, go to step 6.
6.
Lubricate the ABS wheel speed sensor 0-ring and the sensor hole in the knuckle with multi-purpose grease.