Civic L4-1.8L (2006)
Parking Brake Cable: Adjustments
Parking Brake Inspection and Adjustment
Inspection
1. Pull the parking brake lever (A) with 196 N (20 kgf, 44 lbs.) of force to fully apply the parking brake. The parking brake lever should be locked
within the specified number of clicks.
2. If the number of lever clicks is excessive, adjust the parking brake.
Adjustment - Rear Disc Brake Type
1. Remove the front console panel.
2. Release the parking brake lever fully.
3. Loosen the parking brake adjusting nut (A).
4. Raise the rear of the vehicle, and support it with safety stands in the proper locations.
5. Remove the rear wheels.
6. Make sure the parking brake lever (A) on the rear brake caliper contacts the stop pin (B).
