Civic L4-1.8L (2006)
4. Install a new lever cap (A) on to the lever by aligning the notch (B) in the cap with the tab (C) on the lever.
5. With the lever cap and grip in position, push down on the cap to lock the hooks (D) into place.
6. Carefully peel back the front edge (A) of the lever grip, and apply a small amount of gel type super glue (B). Carefully push the grip back into
place and wait a minute for the glue to adhere.
7. Install a new pushrod (A) with the knob (B), and push them into the parking brake lever (C).
NOTE: Do not use the removed push rod and knob.
8. Release and pull the parking brake about 10 times.
9. Check the push knob play of about 0.08 inch (2 mm) and smoothly movement of the parking brake, then do the parking brake inspection.
10. Install the center console.
