Civic L4-1.8L (2006)
14.
Remove the brake booster:
^
Refer to page 19-27 of the 2OO~2OO8 Civic Service Manual, or
^
Online, enter keyword BOOSTER, and select Brake Booster Replacement (RI 8A1 and RI 8A4 Engine) from the list.
15.
Install the new brake booster in the reverse order of removal.
16.
Install a new rod seal on the master cylinder.
17.
Install the master cylinder and reservoir on the brake booster in the reverse order of removal.
18.
Check the brake pedal height and free play after installing the master cylinder, and adjust it if needed:
^
Refer to page 19-6 of the service manual, or
^
Online, enter keywords PEDAL ADJUSTMENT, and select Brake Pedal and Brake Pedal Position Switch Adjustment (A/T) from the list.
19.
Fill the reservoir with brake fluid, and bleed the brake system.
20.
Install all removed parts.
21.
Update the PGM-FI software with the HDS. Refer to Service Bulletin 01-023, Updating Control Units/ Modules.
Disclaimer
