honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Recall - Rear Wheel Speed Sensor Inspection/Replacement|Page 5501 > < Parking Brake Warning Switch|Locations|Page 5492
Page 1
background image

Technical Service Bulletin # 07-055

Date: 080319

Recall - Rear Wheel Speed Sensor Inspection/Replacement

07-055

March 19, 2008

Applies To: 
See VEHICLES AFFECTED

Safety Recall: 
Rear ABS Wheel Speed Sensor and 0-Ring Inspection (Supersedes 07-055, dated September 20, 2007, to update the information marked by the black
bars)

BACKGROUND

During assembly, some wheel speed sensors may have been improperly installed and do not seal the huL assembly. Water may enter the hub assembly
and damage the wheel bearing. In areas where road salt is used, the wheel bearings may corrode, which may cause the wheel to separate and fall off,
increasing thE risk of a crash.

VEHICLES AFFECTED

CUSTOMER NOTIFICATION

All owners of affected vehicles will be sent a notification of this campaign. An example of the customer notification is at the end of this service bulletin.

Before beginning work, verify vehicle eligibility by checking at least one of these items:

^

The customer has a notification letter.

Recall - Rear Wheel Speed Sensor Inspection/Replacement|Page 5501 > < Parking Brake Warning Switch|Locations|Page 5492