Civic L4-1.8L (2006)
23. Measure the distance between the engine block (A) and oil seal (B).
24. Install the baffle plate (A), then install the oil screen (B) with new O-ring (C).
25. Install the oil pump.
26. Install the oil pan.
27. Install the cylinder head.
28. M/T model: Install the flywheel, clutch disc, and pressure plate.
29. A/T model: Install the drive plate.
30. Install the transmission.
31. Install the engine assembly.
NOTE: Whenever any crankshaft or connecting rod bearing is replaced, it is necessary after reassembly to run the engine at idle speed until it
reaches normal operating temperature, then continue running it for about 15 minutes.
