Civic L4-1.8L (2006)
Rocker Arm Assembly: Service and Repair
Rocker Arm and Shaft Disassembly/Reassembly
Rocker Arm and Shaft Disassembly/Reassembly
NOTE:
^
Identify each part as it is removed so that each item can be reinstalled in its original position.
^
Inspect the rocker arm shaft and rocker arms.
^
If reused, the rocker arms must be installed in the same positions.
^
When removing, or installing the rocker arm assembly, do not remove the camshaft holder bolts. The bolts will keep the holders and rocker arms
on the shaft.
^
Remove the rocker shaft bolt before removing the rocker shaft from the No. 5 rocker shaft holder.
^
Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points.
^
Bundle the intake secondary rocker arms with rubber bands to keep them together as a set.
^
When replacing the intake rocker arm assembly, remove the fastening hardware from the new intake rocker arm assembly.