Civic L4-1.8L (2006)
8. Install the water bypass hoses.
9. Connect the engine wire harness connectors, and install the wire harness clamps to the intake manifold.
^
Throttle actuator connector
^
Manifold absolute pressure (MAP) sensor connector
^
Evaporative emission (EVAP) canister purge valve connector
^
Intake manifold tuning (IMT) valve actuator connector
10. Connect the fuel feed hose, then install the quick-connect fitting cover (A).
11. Install the evaporative emission (EVAP) canister hose (A), brake booster vacuum hose (B), positive crankcase ventilation (PCV) hose (C), and
power steering (P/S) hose clamp (D).
