Civic L4-1.8L (2006)
7. Remove the pin or lock pin from the auto-tensioner.
8. Check the oil pump oil seal for damage. If the oil seal is damaged, replace the oil seal.
9. Remove all of the old liquid gasket from the oil pump mating surfaces, bolts, and bolt holes.
10. Clean, and dry the oil pump mating surfaces.
11. Apply liquid gasket, P/N 08717-0004, 08718-0001, 08718-0002, 08718-0003, or 08718-0009, evenly to the engine block mating surface of the oil
pump.
12. Apply liquid gasket to the engine block upper surface contact areas (A) on the oil pump and lower block upper surface contact areas (B) on the oil
pump.
13. Apply liquid gasket, P/N 08717-0004, 08718-0001, 08718-0002, 08718-0003, or 08718-0009, evenly to the oil pan mating surface of the oil
pump.
NOTE: Do not install components if too much time has passed after applying the liquid gasket (for P/N 08718-0002, no more than 4 minutes,
for all others, no more than 5 minutes). Instead, remove the old residue and reapply the liquid gasket.
