Civic L4-1.8L (2006)
13. Rotate the crankshaft clockwise. Align the No. 2 piston TDC groove (A) on the camshaft sprocket with the top edge of the head.
14. Check, and if necessary, adjust the valve clearance on No. 2 cylinder.
15. Install the cylinder head cover.
16. If the maintenance minder required to adjust the valve clearance, reset the maintenance minder, and this procedure is complete. If the maintenance
minder did not require to adjust the valve clearance, go to step 17.
17. Connect the HDS to the data link connector (DLC).
18. Turn the ignition switch ON (II).
19. Select BODY ELECTRICAL with the HDS.
20. Select ADJUSTMENT in the GAUGES MENU with the HDS.
21. Select RESET in the MAINTENANCE MINDER with the HDS.
22. Select MAINTENANCE SUB ITEM 4 RESET with the HDS.
