Civic L4-1.8L (2006)
Interior Lighting Module: Testing and Inspection
MICU Input Test
1. Before troubleshooting the entry lights control system, troubleshoot the B-CAN System Diagnosis Test Mode A.
2. Check the No. 10 (7.5 A) fuse in the under-dash fuse/relay box. If any fuse is blown, replace it and go to step 3.
3. Disconnect the under-dash fuse/relay box connectors E, F, G, K, Q, and T.
NOTE: All connector views are wire side of female terminals.
4. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.
-
If the terminals look OK, go to step 5.