Civic L4-1.8L (2006)
3. Disconnect the under-dash fuse/relay box connectors E, F, G, P, Ohm, R, S, and T.
NOTE: All connector views are wire side of female terminals.
4. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.
-
If the terminals look OK, go to step 5.
5. With the connectors still disconnected, make these input tests at the appropriate connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 6.
