Civic L4-1.8L (2006)
Air Bag(s) Arming and Disarming: Service and Repair
Connector Disconnection / Connection
Spring-loaded Lock Connector
Some SRS system connectors have a spring-loaded lock.
Front Airbag Connectors
Disconnecting
To release the lock, pull the spring-loaded sleeve (A) toward the stop (B) while holding the opposite half of the connector. Then pull the connector
halves apart. Be sure to pull on the sleeve and not on the connector.
Connecting
To reconnect, hold the pawl-side connector, and press on the back of the sleeve-side connector in the direction shown. As the two connector halves are
pressed together, the sleeve (A) is pushed back by the pawl (C). Do not touch the sleeve.
Side Airbag Connector
Disconnecting
To release the lock, pull the spring-loaded sleeve (A) toward the stop (B) while holding the opposite half of the connector. Then pull the connector
halves apart. Be sure to pull on the sleeve and not on the connector half.
