Civic L4-1.8L (2006)
7. When diagnosis/troubleshooting is done at the ECM/PCM connector, use the terminal test port (A) above the terminal you need to check.
8. Gently slide the pin probe (male) into the terminal test port from the terminal side. Do not force the tips into the terminals.
NOTE:
-
For accurate results, always use the pin probe (male).
-
To prevent damage to the connector terminals, do not insert test equipment probes, paper clips, or other substitutes as they can damage the
terminals. Damaged terminals cause a poor connection and an incorrect measurement.
-
Do not puncture the insulation on a wire. Punctures can cause poor or intermittent electrical connections.
