honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Engine Controls - MIL ON/DTC P0128 Is Set|Page 3516 > < Emissions - OBD II DTC's And Associated Monitors|Page 3511
Page 1
background image

Engine Control Module: All Technical Service Bulletins
Engine Controls - MIL ON/DTC P0128 Is Set

09-092

February 17, 2010

*Applies To: 
2006-09 Civic - ALL Except GX, Hybrid, and Si
2006-09 Civic: MIL Comes On With DTC P0128*

(Supersedes 09-092, dated November 25, 2009, to revise the information marked by the black bars and asterisks)

*REVISION SUMMARY
In Applies To and under SOFTWARE INFORMATION, 2009 Civic information was added. In the program table, the 2006 Civic M/T was added.*

SYMPTOM

The MIL comes on with DTC P0128 (cooling system malfunction).

PROBABLE CAUSE

The PGM-FI software misinterprets sensor inputs as a cooling system malfunction, causing DTC P0128 to be set. This DTC can also be caused by loose
or corroded terminals in ECT sensor 2 or its 2P connector.

CORRECTIVE ACTION

Update the PGM-FI software with the HDS. If needed, replace ECT sensor 2 and its wire harness.

SOFTWARE INFORMATION

*2006-08 Civic*

HDS Software Version:

2.020.015 (November 2009) or later. 

Control Module (CM) Update:

Database Update 22-OCT-2009 or later.

*2009 Civic

HDS Software Version:

2.020.022 (January 2010) or later. 

Control Module (CM) Update:

Database Update 25-DEC-2009 or later.*

NOTE

To avoid an incorrect repair that would not be covered under warranty, use the software version listed above or a later version.

The updated PGM-FI software program ID and P/N is shown. If the HDS is loaded with the latest software, and it displays No Update Needed during the
update, the software for this service bulletin is already installed.

WARRANTY CLAIM INFORMATION

Engine Controls - MIL ON/DTC P0128 Is Set|Page 3516 > < Emissions - OBD II DTC's And Associated Monitors|Page 3511