honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Customer Interest:|06-086 > < Engine Controls - MIL ON/DTC P0455 Stored
Page 2
background image

Office. You must request consideration, and get a decision, before starting work.

SOFTWARE INFORMATION

*HDS Software Version: 2.009.007 or later.

NOTE

If you do not use the correct HDS software version, the HDS may incorrectly indicate that the vehicle does not need an update.

The updated PGM-FI software program IDs and PINs are shown below. If these or later program IDs are the Current Program IDs displayed during the
update, the software for this service bulletin is already installed.*

DIAGNOSIS

1.

Use the HDS to retrieve the DIG P0455 freeze data and/or the on-board snapshot.

2.

Compare the MAP sensor voltage to the BARO sensor voltage:

^

If the two readings are within 0.05 volt of each other, go to REPAIR PROCEDURE.

^

If the two readings are not within 0.05 volt of each other, this service bulletin does not apply; continue with normal troubleshooting.

REPAIR PROCEDURE

*Update the PGM-FI software with the HDS and software version 2.009.007 or later. Refer to Service Bulletin 01-023, Updating Control Unit
/Modules.*

Disclaimer

Customer Interest:|06-086 > < Engine Controls - MIL ON/DTC P0455 Stored