honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Computers/Controls - Cannot Rewrite PCM/ECM/Immobilizer|Page 86 > < Computers/Controls - Cannot Rewrite PCM/ECM/Immobilizer|Page 84
Page 4
background image

11.

Place your hand at the back of the switch panel, then gently pull from the driver's lower cover opening to release the clips and hook.

12.

Pry up on the inside edge of the subdisplay visor with a trim tool to detach the clip and release the pin.

13.

Detach the clips along the upper edge of the subdisplay visor, then gently pull out the visor to release the hooks.

14.

Disconnect the illumination control switch connector and the power mirror switch connector.

Computers/Controls - Cannot Rewrite PCM/ECM/Immobilizer|Page 86 > < Computers/Controls - Cannot Rewrite PCM/ECM/Immobilizer|Page 84