Civic L4-1.8L (2006)
Operation Number:
732100
Flat Rate Time:
0.5 hour
Failed Part:
P/N 78200-SVA-A21
H/C 8158230
Defect Code:
03217
Symptom Code:
01201
Skill Level:
Repair Technician
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.
REPAIR PROCEDURE
NOTE:
^
When replacing the ECM/PCM, immobilizer programming is a portion of the ECM/PCM replacement. For the complete replacement procedure,
go online, enter keyword ECM REPLACE, and select the appropriate ECM/PCM Replacement procedure.
^
When replacing the immobilizer-keyless control unit, you need all the customer's keys. You also need the PCM code to complete the procedure.
^
Once the HDS retrieves the ODO data from the gauge control module, the ODO value on the LCD displays "----", making the ODO function
unusable. The HDS holds only one ODO value at any time in its memory.
^
Get the new gauge control module before doing the rewriting procedure.
1.
Install the ECM/PCM or immobilizer-keyless control unit.
^
ECM/PCM replacement: online, enter keyword ECM REPLACE, and select ECM Replacement.
^
Immobilizer-keyless control unit replacement:
online, enter keyword IMMOBI, and select Immobilizer-keyless Control Unit Replacement.
2.
You need the PCM code to complete the procedure. Online:
^
Click Service.
^
Click Vehicle Information.
^
Click Immobilizer Code Inquiry.
3.
Connect the HDS to the data link connector.
4.
Select Gauges from the BODY ELECTRICAL menu display.
5.
Select Gauge Control Module Replacement (ODO rewrite) from the ADJUSTMENT menu, and follow the on-screen instructions to retrieve the
ODO value.
6.
Adjust the steering column upward.
