Civic L4-1.8L (2006)
^
Make sure the seat harness connectors and the parking brake cables are routed correctly.
^
Push the Velcro fasteners and the clips securely into place.
^
Push the accelerator hooks securely into place, and make sure the accelerator pedal is correctly attached to the floor.
11. Reinstall the rear seat cushion:
^
Make sure there are no kinks or twists in the seat belts, then slip the seat belt buckles through the slits in the seat cushion as you install the seat
cushion.
^
Torque the seat cushion mounting bolt to 9.8 N.m (7.2 lb-ft).
12. Reinstall the rear seat-back:
^
Make sure there are no kinks or twists in the center seat belt, then guide the center seat belt over the front of the seat-back as you install the
seat-back.
^
Torque the pivot bracket bolt and the seat-back mounting bolts to 22 N.m (16 lb-ft).
^
Make sure the pivot bracket hooks are secured.
13. Reinstall the rear side trim panels. Make sure the clips, the hooks, and the tabs are secured.
14. Reinstall the center console. Torque the center console mounting bolts to 5 N.m (4 lb-ft).
15. Reinstall the steering joint cover.
16. Reinstall the driver's and the passengers kick panels. Make sure the clips are secured.
17. Reinstall the driver's and the passenger 5 dashboard undercovers. Make sure the clips are secured.
18. Reinstall the front seats:
^
Apply Hondalock 2 Thread lock to the seat bolts, then reinstall the bolts, and torque them to 34 N.m (25 lb-ft).
^
Make sure the floor harness connectors are securely connected to the connectors under the seats.
19. Do the battery terminal reconnection procedure.
20. Test-drive the vehicle, and make sure that all vehicle systems and controls are working properly.
21. Connect the HDS to the vehicle's DLC, and clear any DTCs that you find.
Disclaimer
