Civic L4-1.8L (2006)
Seat Occupant Sensor: Service and Repair
Front Passenger's Weight Sensor
Front Passenger's Weight Sensor Replacement
4-door
Removal
NOTE: Removal of the front passenger's weight sensors must be performed according to the precautions/procedures described at the beginning of the
SRS section.
1. Disconnect the negative cable from the battery, and wait at least 3 minutes before beginning work.
2. Remove the front passenger's seat assembly section.
3. Remove the cushion cover/pad from the seat cushion frame.
4. Using a Torx E18 socket, remove the Torx nuts (A) attaching the seat track (B) to the weight sensors (C).
5. Disconnect the sensor connectors (D) from the seat weight sensor, then remove the front passenger's weight sensors.
Installation
NOTE: Be sure to install the harness wires so they are not pinched or interfering with other parts.
1. Install the new front passenger's weight sensors under the seat track.