honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Recall - ODS Unit Replacement|Page 7111 > < Recall - ODS Unit Replacement|Page 7109
Page 3
background image

ODS Unit: P/N 81169-SVA-A03, H/C 8261737

REQUIRED SPECIAL TOOLS

HDS with software version 2.002.006 or later

WARRANTY CLAIM INFORMATION

Operation Number:

7521B5

Flat Rate Time:

0.4 hour

Failed Part:

P/N 81169-SVA-A01 
H/C 8070823

Defect Code:

58800

Symptom Code:

Q0100

Template ID:

06-002A

Skill Level:

Repair Technician

REPAIR PROCEDURE

1.

Make sure you have the anti-theft code for the audio system and the navigation unit (if equipped).

2.

Turn the ignition switch to the LOCK (0) position.

3.

Disconnect the negative cable from the battery, then wait at least 3 minutes before you continue.

4.

Remove the front passenger's seat-back panel:

^

Push down at the top to release the top three hooks.

^

Tilt the panel out at the top to release the sides.

^

Lift the panel up and off the two lower clips.

5.

Pull back the seat-back cover from the left side bolster so you can access the ODS unit.

6.

Unplug the electrical connectors.

7.

Remove the mounting screws from the ODS unit, then gently remove the unit.

8.

Install the replacement ODS unit.

9.

Slip the seat-back cover over the ODS unit.

10.

Reinstall the seat-back panel.

11.

Reconnect the negative cable to the battery, then turn the ignition switch to the ON (II) position.

12.

Initialize the ODS unit. Refer to the Honda Diagnostic System (HDS), and follow the SRS on-screen procedures:

*

NOTE:

When calibrating the ODS, make sure you use a prepared weight of 55 to 75 lbs.*

^

Select SRS.

^

Select Calibration.

^

Select ODS Unit Initialization.

^

Follow the screen prompts.

Recall - ODS Unit Replacement|Page 7111 > < Recall - ODS Unit Replacement|Page 7109