Civic L4-1.8L (2006)
^
Wrap the remaining length of the felt around the wire harness. Make sure the bottom of the felt is secured to the corrugated tubing on the
harness.
8.
Remove the two lower clips from the seat-back frame, and install two new lower clips on the seat- back rear panel.
9.
Carefully reinstall the seat-back rear panel, making sure all the clips and hooks are engaged.
10.
Center-punch a completion mark below the fifth character of the engine compartment VIN:
^
Slide open the FRAME NUMBER door on the center cowl cover.
^
Use a long punch to reach the VIN.
Disclaimer
