Civic L4-1.8L (2006)
10. Install the belt in the reverse order of removal, and note these items:
-
Check that the retractor locking mechanism functions.
-
Assemble the washers, collars, and bushings on the upper and lower anchor bolts as shown.
-
If the seat belt tensioner has been deployed, replace the front seat belt protector with a new one.
-
Apply medium strength type liquid thread lock to the anchor bolts before reinstallation.
-
Before installing the anchor bolts, make sure there are no twists or kinks in the front seat belt.
-
Make sure the seat belt tensioner connector is plugged in properly.
-
Passenger's seat belt: Before attaching the front seat belt lower anchor, make sure there are no twists or kinks in the belts.
-
Passenger's seat belt: Triangle marks (A) on the anchor plate (B) and on the lower anchor (C) must face the same side.
-
Passenger's seat belt: Insert the hook on the anchor plate into the lower anchor, and be sure that the lower anchor is locked securely.
-
Reconnect the negative cable to the battery.
-
Enter the anti-theft codes for the audio or the navigation system, then enter the customer's audio presets.
-
Set the clock.
-
Check for any DTCs that may have been set during repairs, and clear them.
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
NOTE: Check the front seat belts for damage, and replace them if necessary.
Front Seat Belt - 4 - door
1. Make sure you have the anti-theft codes for the audio or the navigation system, then write down the audio presets.
2. Disconnect the negative cable from the battery, and wait at least 3 minutes before beginning work.
