Civic L4-1.8L (2006)
8. Install the buckle in the reverse order of removal, and note these items:
-
Assemble the washers on the center anchor bolt as shown.
-
Apply medium strength type liquid thread lock to the center anchor bolt before reinstallation.
-
Tighten the bolts by hand first, then tighten to specification with a torque wrench.
-
Make sure the seat belt switch connector and seat belt buckle tensioner connector are plugged in properly.
-
Reconnect the negative cable to the battery.
-
Enter the anti-theft codes for the audio or the navigation system, and then enter the customer's audio presets.
-
Set the clock.
-
Check for any DTCs that may have been set during repairs, and clear them.
Passenger's Seat Belt Lower Anchor
1. Remove the door sill trim.
2. Remove the lower anchor bolt (A), then remove the lower anchor (B).
3. Install the lower anchor in the reverse order of removal, and note these items:
-
Apply medium strength type liquid thread lock to the lower anchor bolt before reinstallation.
-
Assemble the washers, collars, and bushing on the lower anchor bolt as shown.