Civic L4-1.8L (2006)
WARRANTY CLAIM INFORMATION
Failed Part: P/N
81127-SVA-A02
H/C 8194383
Defect Code:
5HN00
Symptom Code:
Q2100
Skill Level:
Repair Technician
REPAIR PROCEDURE
1.
Connect the HDS to the vehicle's data link connector (DLC), and check for DTC 86-25.
^
If DTC 86-25 is stored, go to step 2.
^
If DTC 86-25 is not stored, go to step 3
2.
Replace the front passenger's seat-back pad/OPDS sensor:
^
Refer to page 20-169 of the 2006 Civic Service Manual, or
^
Online, enter keyword SEAT-BACK, and select Front Seat-back Cover Replacement (2-door) from the list.
NOTE:
^
Leave the seat-back rear panel off.
^
If the OPDS wire harness on the new OPDS sensor is not already insulated with wool felt, go to step 4.
^
If the OPDS wire harness on the new OPDS sensor is already insulated, you do not need to do step 7. Cut a 50 x 100 mm piece of wool
felt, and do steps 5, 6, 8, 9, and 10.
3.
Remove the rear panel from the front passengers seat-back:
NOTE:
To avoid breaking the rear panel, do not pull the top of it more than needed to release the C- hooks, and never pull it by its sides.
