Civic L4-1.8L (2006)
9. Remove the shift solenoid harness connector (E), and replace it.
10. Install the new O-ring (F) on the new shift solenoid harness connector, and install the connector in the transmission housing.
11. Connect WHT harnesses and ORN harness connector to shift solenoid valve B. ATF temperature sensor is assembled in the connector with WHT
harnesses.
12. Connect BLU harness terminal to shift solenoid valve A, GRN harness terminal to shift solenoid valve C, and YEL harness terminal to shift
solenoid valve D.
13. Install the shift solenoid valve cover, dowel pins, a new gasket, harness clamp bracket.
14. Check the connector for rust, dirt, or oil, then connect the connector securely.
15. Refill the transmission with ATF.
16. Install the splash shield.
