Civic L4-1.8L (2006)
5. Reconnect the 22P connector to the power window master switch. Turn the ignition switch ON (II), and make these input tests at the connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, the control unit must be faulty; replace the power window master switch.
6. Reset the power window control unit.
2-door with AUTO UP/AUTO DOWN function
NOTE: The power window control unit is built into the power window master switch, and it only controls the driver's window operations.
1. Remove the door panel.