Civic L4-1.8L (2006)
Washer Fluid Level Switch: Testing and Inspection
Washer Fluid Level Switch Test
Canada
1. Remove the right inner fender.
-
2-door
-
4-door
2. Disconnect the 2P connector (A) from the washer fluid level switch (B).
3. Remove the washer fluid level switch from the washer reservoir.
NOTE: Fluid may flow out of the opening.
4. Check for continuity between the No. 1 and No. 2 terminals in each float position.
-
There should be continuity when the float is down.
-
There should be no continuity when the float is up.
5. If the continuity is not as specified, replace the switch.