Civic L4-1.8L (2006)
15. Move the power steering pump toward the driver's side, then raise it.
16. Connect the pump inlet hose and pump outlet hose onto the new pump with new O-ring.
17. Loosely install the pump in the pump bracket with the mounting bolts, then tighten the pump fittings securely.
18. Tighten the pump mounting bolts to the specified torque.
19. Install the drive belt (A).
Note these items during belt installation:
^
Make sure that the belt is properly positioned on the pulleys (B).
^
Do not get power steering fluid or grease on any parts around the power steering pump, drive belt, or pulley faces. Clean off any fluid or grease
before installation.
20. Fill the reservoir to the upper level line.
