Civic L4-1.8L (2006)
2. Remove the wheel nuts (A) and front wheel.
3. Remove the brake hose mounting bolt (A).
4. Remove the brake caliper bracket mounting bolts (B), and remove the caliper assembly (C) from the knuckle. To prevent damage to the caliper
assembly or brake hose, use a short piece of wire to hang the caliper assembly from the undercarriage. Do not twist the brake hose excessively.
5. Remove the wheel sensor (A) from the knuckle (B). Do not disconnect the wheel sensor connector.
6. Raise the stake (A), then remove the spindle nut (B).
