Civic L4-1.8L (2006)
10. Remove and discard the trailing arm rear mounting bolt (A).
NOTE: Use a new mounting bolt during reassembly.
11. Lower the jack, and remove the trailing arm.
12. Install the trailing arm in the reverse order of removal, and note these items:
^
Tighten all mounting hardware to the specified torque values.
^
First install all the components, and lightly tighten the bolts, then raise the suspension to load it with the vehicle's weight before fully tightening
to the specified torque values.
^
Check the brake hose for interference and twisting.
^
Before installing the wheel, clean the mating surface on the brake disc or brake drum and the inside of the wheel.
^
Check the wheel alignment, and adjust it if necessary.
