Civic L4-1.8L (2006)
8. Push the shift cable (A) until it stops, then release it. Pull the shift cable back one step so that the shift position is in R. Do not hold the shift cable
guide (B) to adjust the shift cable.
9. Turn the ignition switch ON (II), and verify that the R position indicator comes on.
10. Turn the ignition switch OFF.
11. Place the shift lever in the R position, then insert a 6.0 mm (0.24 inch) pin (A) into the positioning hole (B) on the shift lever bracket, through the
positioning hole on the shift lever, and into the positioning hole on the bracket. Use only a 6.0 mm pin that is free any burns.
12. Verify that the shift lever is secured in the R position.