Civic L4-1.8L (2006)
Transmission Position Switch/Sensor: Service and Repair
Transmission Range Switch Replacement
1. Lift the vehicle up on a hoist, or apply the parking brake, block the rear wheels, and raise the front of the vehicle. Make sure it is securely
supported.
2. Shift the N position.
3. Remove the transmission range switch cover.
4. Remove the transmission range switch.
5. Make sure the selector control shaft is in the N position. If necessary, move the shift lever to the N position.
NOTE: Do not use the selector control shaft to adjust the shift position. If the selector control shaft tips are squeezed together it will cause a faulty
signal or position due to play between the selector control shaft and switch.