Civic L4-1.8L (2006)
Clutch Slave Cylinder: Service and Repair
Slave Cylinder Replacement
NOTE: Use fender covers to avoid damaging painted surfaces. Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid does
contact the paint, wash it off immediately with water.
1. Remove the clutch line bracket (A), the mounting bolt (B) and the slave cylinder (C).
2. Remove the roll pins (A). Disconnect the clutch line (B), and remove the O-ring (C). Plug the end of the clutch line with a shop towel to prevent
brake fluid from coming out.
3. Install the slave cylinder in the reverse order of removal. Install the new O-ring (A).
