Civic L4-1.8L (2006)
1. Wrap the splines with vinyl tape (A) to prevent damage to the inboard boot and dynamic damper.
2. Install the dynamic damper and inboard boot onto the driveshaft, then remove the vinyl tape. Take care not to damage the inboard boot and
dynamic damper.
3. Install the spider (A) onto the driveshaft by aligning the marks (B) on the spider and the end of the driveshaft.
4. Fit the circlip (C) into the driveshaft groove. Always rotate the circlip in its groove to make sure it is fully seated.
