Civic L4-1.8L (2006)
4. Install the outboard joint (A) into the front hub (B).
5. Install the knuckle (A) onto the lower arm (B). Then tighten the nuts and bolt (C) to the lower torque specification.
6. Install a new spindle nut (A), then tighten the nut. After tightening, use a drift to stake the spindle nut shoulder (B) against the driveshaft.
7. Clean the mating surfaces of the brake disc and the front wheel, then install the front wheel with the wheel nuts.
8. Refill the transmission with recommended transmission fluid.
9. Check the front wheel alignment, and adjust it if necessary.
