Civic L4-1.8L (2006)
3. Remove the brake hose bracket mounting bolt (A) from the knuckle.
4. Remove the brake caliper bracket mounting bolts (B), and remove the caliper assembly (C) from the knuckle. To prevent damage to the caliper
assembly or brake hose, use a short piece of wire to hang the caliper assembly from the undercarriage. Do not twist the brake hose excessively.
5. Remove the two washers (A).
6. Remove the 6 mm brake disc retaining screws (A).
7. Remove the brake disc (B) from the hub bearing unit.
NOTE: If the brake disc has clung to the hub bearing unit. Screw two 8 x 1.25 mm bolts (C) into the brake disc to push it away from the hub
bearing unit. Turn each bolt 90 degrees at a time to prevent cocking the brake disc.
