Civic L4-1.8L (2006)
8. With a sponge, apply a light coat of glass primer to the inside face of the front corner glass (A) as shown, then lightly wipe it off with gauze or
cheesecloth:
-
With the printed dots (B) on the front corner glass as a guide, apply the glass primer to both lower corner portions of the front corner glass.
-
Do not apply body primer to the front corner glass, and do not get body and glass primer sponges mixed up.
-
Never touch the primed surfaces with your hands. If you do the adhesive may not bond to the front corner glass properly, causing a leak after
the front corner glass is installed.
-
Keep water, dust, and abrasive materials away from primed surface.
9. With a sponge, apply a light coat of body primer to the original adhesive remaining around the front corner glass opening flange. Let the body
primer dry for at least 10 minutes:
-
Do not apply glass primer to the body, and be careful not to mix up glass and body primer sponges.
-
Never touch the primed surfaces with your hands.
-
Mask off the dashboard before painting the flange.