Civic L4-1.8L (2006)
Windshield Washer Motor: Testing and Inspection
Washer Motor Test
1. Remove the right inner fender.
-
2-door
-
4-door
2. Disconnect the 2P connector (A) from the washer motor (B).
3. Test the motor by connecting battery power to the No. 1 terminal and ground the No. 2 terminal of the washer motor. The motor should run.
-
If the motor does not run, or fails to run smoothly, replace it.
-
If the motor runs smoothly, but little or no washer fluid is pumped, check for a disconnected or blocked washer hose, or a clogged washer
motor outlet.
