Civic L4-1.8L CNG (2008)
Seat Bottom Frame: Service and Repair
Front Seat Frame Replacement
Passenger's Seat - 2-door
Calibrate the ODS unit after any of the these actions:
-
Front passenger's seat replacement (including any seat components)
-
Replacement of the seat weight sensors
-
After a vehicle collision
NOTE:
-
Put on gloves to protect your hands.
-
Apply oil to the pivot portions of the slide locks.
-
Apply multipurpose, grease to the sliding portions of the seat tracks.
-
Make sure the ODS unit connectors are plugged in properly.
-
Make sure the ODS wires are routed properly so they are not pinched and do not interfere with other parts.
-
If the side airbag has deployed, replace the seat frame and related parts with new ones.
1. Remove the front seat.
2. Slide the front seat frame rearward fully, detach the clips, then remove the front rail covers (A) from the front of both seat tracks.
3. Slide the front seat frame forward fully, detach the clips, then remove the left rear rail cover (A) and the right rear rail cover (B) from the back of
both seat tracks.
