Civic L4-1.8L CNG (2008)
When the remaining engine oil life is 5 to 1 percent, you will see a "SERVICE" message along with the maintenance item code(s), every time you turn
the ignition switch to the ON (II) position.
The maintenance item code or codes indicate the main and sub items required at the time of the oil change. For an explanation of Maintenance Minder
Codes and what service should be performed, refer to Indicator Based Service. See: Service Intervals/Condition/Indicator Based Maintenance
Services/Indicator Based Service
You can switch the display to the odometer, the trip meter, and the outside temperature indicator (if equipped) by pushing the SEL/RESET button on the
dashboard repeatedly.
When the engine oil life is 15 to 1 percent, the maintenance minder indicator (Wrench icon) comes on every time you turn the ignition switch to the ON
position, then it goes out if you switch the information display.
When you see this message, the indicated maintenance should be performed as soon as possible.
When the remaining engine oil life is 0 percent, the engine oil life indicator will blink. The display comes on every time you turn the ignition switch to
the ON (II) position. The maintenance minder indicator (Wrench icon) also comes on and remains on in the instrument panel. When you see this
message, the indicated maintenance should be immediately performed.
If you do not perform the indicated maintenance, negative mileage is displayed and begins to blink after the vehicle has been driven 10 miles (10 km) or
more.
Negative mileage means your vehicle has passed the maintenance required point. Have the indicated maintenance done immediately.
You can change the information display from the engine oil life display to the odometer, the trip meter, or the outside temperature (if equipped) every
time you press and release the SEL/RESET button.
When the engine oil life is 0 percent or negative mileage, the maintenance minder indicator (Wrench icon) remains on even if you change the
information display.
Immediately have the service performed, and make sure to reset the display. Refer to Resetting the Maintenance Minder. See: Service and Repair
