Civic L4-1.8L CNG (2008)
12. Disconnect the lower ball joint (E) from the lower arm.
13. Remove the damper pinch bolts (A) and the self locking nuts (B) from the damper.
14. Remove the driveshaft outboard joint (C) from the knuckle (D) by tapping the driveshaft end (E) with a soft face hammer while drawing the hub
outward, then remove the knuckle.
NOTE:
^
Do not pull the driveshaft end outward. The driveshaft inboard joint may come apart.
^
During installation, apply grease to the mating surfaces of the wheel bearing and driveshaft outboard joint.
15. Remove the lock pin (A) from the lower ball joint, then remove the castle nut (B).
